It is intended for pumping clean of very slightly polluted, low vicosity liquids without solid particles fibers and abrasives.
Suction Flange : DN 50... DN 300
Discharge Flange : DN 32... DN 250 mm
Q (Flow) : 1700 m3/h (max.)
H (Head) : 110 m (max.)
Motor (Rotation Per Minute) : 1450 rpm. from 2900 rpm up to 3600 rpm.
t (Operating Temperature) : from -10 °C (min.) to +140 °C (max.)
Pd (Body Pressure Pmax) : 10-16 bars
Direction of Rotation (Motor) : Clockwise (Right)
(Pmax: Suction Pressure + Pump Head in Closed Vlave)
(*) The pump material varies depending on te type of fluid, operating temperature and pressure.
For more information, please refer to our company.
- Centrifugal pumps with horizontal shaft, single-stage, end suction, closed impeller volute.
- Body sizes conform to TS EN 733 standards.
- Maintenance-free sealed type ball bearings are used in SNSP type of pumps.
- Shaft sealing is provided by soft seal, optionally and according to the type of the fluid pumped pumps with mechanical seals can also be manufacured.
- In addition to 29 models according to according to EN 733 standard, 25 pieces of non-standard models.
- The sizes of non-standard models may be different from the models of other manufacturers.
- Suction and discharge flanges conform to EN 1092-2 / PN 16.
- Bearing group, seal bearing, pump shaft and impeller can be dismantled without separating the volute off the piping installation thanks to design that can be dismantled from the back.
- All of the impellers have been dynamically balanced according to ISO 1940 class 6.3.
- Axial force has been balanced by back wear ring balancing holes system.
- Pump Name : SNSP
- Discarge Flange DN (mm) : 32
- Impeller Nominal Diameter (mm) : 160
01 Housing Cover
02 Spacer Bushing
03 Bearing Cover
04 Ball Bearing
05 Support Foot
06 Coupling Key
07 Bearing Cover
08 Pump Shaft
09 Bearing Races
10 Water Splash Disk
11 Mechanical Seal
14 Impeller Key
15 Impeller Nut
16 Volute Casing
17 Drain Plug
18 Watering Ring
19 Mechanical Seal (Glen)
20 Cylindrical Roller
21 Bearing Angular Contact Ball Bearing
22 Oil Seal
23 Glen Stud and Nut
24 Soft Seal